Easy-to-master two-part painting system for professional and D.I.Y. application. Simpler to use than other two-part polyurethanes, Perfection has been formulated to enable do-it-yourselfers” to easily achieve professional quality results on topsides, superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection—even on the highest wear areas. It is resistant to a wide range of chemicals, including fuels, mild acids and detergents. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Not for use over one-part enamels. Perfection is for application above the waterline only. Key Features Durable, abrasion-resistant finish Good choice for high-traffic areas Exceptional gloss Resistant to diesel, petrol, oil, mild acids and alkalis Professional results made easy Physical Data Formulation: Two-part polyurethane Finish: High Gloss Volume Solids: 49% VOC: 686g/lit. Application Number of Coats Recommended: Spray: Half coat plus two full coats minimum; Brush/roller: Two full coats minimum Coverage: Theoretical: 541.4sq.ft./gal.;Practical: 488.5sq.ft.gal. Recommended DFT: 1.5 mils dry Recommended WFT: 3 mils wet Application Temperatures:Ambient temperature should be minimum 50(10C) and maximum 104F (40C) Application Methods: Brush, conventional spray, roller Mixing Ratio: 2:1 (Kit includes base and reactor.) Compatibility/substrates: Apply only over sanded two-part polyurethane finishes, Interlux Epoxy Primekote 404 or Interprime 880. Thinner:Brushing or rolling: Y2333N (10% by volume); Spraying: 2316N Drying Times Drying @50F @79F @73F @95F Potlife 4 hr. 3 hr. 2 hr.