Durable, solvent-resistant paint for the bilge.Formulated to withstand the abusive conditions encountered in boat bilges, this high-performance alkyd finish produces adurable coating that is resistant to antifreeze, grease, gasoline, diesel fuel, and engine oil. Creates a tough resilientsurface that stands up to years of abrasion and wear. Key Features Performance coating uniquely designed for boat bilges Resistant and tough on fuel and oil spills Abrasion resistant with a resilient surface Utilizes a high-solids formula that is easy to brush or roll in difficult spaces Physical Data Type: Oil modified Alkyd Finish: High-gloss Available colors: White, Grey Components: 1 Curing mechanism: Solvent Release Solids by Volume: 51.0% +/- 2% (Theoretical) Solids by weight: 65.0% +/- 2% (Theoretical) Coverage: 545sq. ft. /gal. VOC: 388 g/l Max. (as supplied) Active ingredients: Cuprous Oxide 40.5% Flash point: 110 F Application Application Method: Brush, roller or spray Number of coats recommended: 2 Coats Wet Film Thickness: 3.0 mils Dry Film Thickness: 1.5 mils Applicator: High-quality short nap roller (maximum 3/8” nap) brush Application temperature Min. /Max. Range: Minimum 50F and Maximum 90F. Thinner: 120 Brushing ,model 249961 Drying Times*(Hours) Drying @50F @70F @90F To Touch 6 hr. 3 hr. 1-1/2 hr. To Recoat 24 hr. 16 hr. 8 hr. *The above dry times are minimums. May be recoated after the minimum time shown. There is no maximum dry time